Getting Started; Baby Unit Power Supply; Parent Unit Battery Installation - Motorola MBP43 User Manual

2. Getting Started

2.1

Baby Unit Power Supply

1. Connect the small plug of the power adapter to the baby unit and the other
end to the electrical outlet.
NOTE
Only use the enclosed power adapter (5.9V DC / 1000mA).
2. Slide the ON/OFF switch to the ON position. The power LED will light up
in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2

Parent Unit Battery Installation

1. Insert the wire tab of the rechargeable battery pack into the contact slot as
shown above and fit the battery pack into the compartment.
2. Replace the battery cover over the compartment and gently tighten the
screw in a clockwise direction using a Small cross head or Flat end
screwdriver.
Getting Started
Black Red
Small cross head or
Flat end screwdriver
9