Using The Baby Monitor; Setting Up; Pan And Tilt; Night Vision Mode - Motorola MBP43 User Manual

3. Using the Baby Monitor

3.1

Setting up

• Place the baby unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the baby unit's head angle by using the parent unit to pan and tilt the
camera up, down, left and right until you are satisfied with the image in the
parent unit.
NOTE
Do not place the baby unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2

Pan and Tilt

The camera can be remotely controlled from the parent unit when in normal
video mode.
+
1. Press the UP button or
<
2. Press the LEFT button or
3.3

Night Vision Mode

The baby unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor detects a low level of ambient light, the
LEDs will automatically activate and the screen on the parent unit will display in
black and white. The
3.4

Talk Mode

Press and hold the
the baby unit's loudspeaker. The
screen.
3.5

Video ON/OFF

V
Press the VIDEO ON/OFF key to turn the LCD display on or off, but still leave
the audio monitor on.
12
-
DOWN button to tilt upward or downward.
>
N
icon will be displayed on the screen.
T
TALK button on the parent unit to talk to your baby through
T
icon will be displayed at the top of the LCD
RIGHT button to pan left or right.
Using the Baby Monitor