Components
Door switch
Oven lamp
Warming Drawer heater
Test procedures
1. Refer to page 3-8 for the servicing procedure
2. Measure the resistance after cooling down
(Multiple meter scale: R x 1)
1. Measure the resistance after cooling down
(Multiple meter scale: R x1)
1. Refer to page 3-15 for the servicing procedure
2. Measure the resistance after cooling down
(Multiple meter scale : R x 1)
4-3
Results
Door open
Door closed
Continuity
Infinite
Normal: Approximately
5 Ω ± 10%
If not replace
Normal: Approximately
24 Ω ± 10%
If not replace
NOTE: Ω Value was tested
at room temperature
(77F/25˚C)
Be careful the element is
sensitive to temperature.