Related Manuals for Fenix ECOSTATIC WMX706
Summary of Contents for Fenix ECOSTATIC WMX706
- Page 1 N88/R01(18.02.04) Instalation and User Instructions STATIC STORAGE HEATERS ECOSTATIC - WMX WMX706 – WMX724 Electric Storage Heaters...
- Page 3 ECOSTATIC WMX MANUAL STORAGE HEATER RANGE MODELS: WMX706 - 6kWh WMX712 - 12kWh WMX718 - 18kWh WMX724 - 24kWh INSTALLATION OPERATING INSTRUCTIONS IMPORTANT PLEASE READ THIS LEAFLET CAREFULLY AND RETAIN FOR FURTHER USE. NOTE ALSO THE INFORMATION GIVEN ON THE HEATER The installation must be carried out by a competent electrician and should be in accordance with I.E.E.
-
Page 4: Installation Instructions
INSTALLATION INSTRUCTIONS Place the heater on its feet and in the desired position PREPARATION against the wall. Ensure the heater is based on a firm level surface at least 75mm from any end wall and at least 250mm below any shelf or similar projection. Cut away any The heater will arrive Model 706 - 4 bricks gripper rod or carpet which would prevent the heater sitting... - Page 5 THE FOLLOWING MUST BE APPLIED WHEN FIXING THE HEATER TO THE WALL BRACKET i) If no skirting board is present secure the heater through the wall bracket slots closest to the wall. ii) If 100mm (4in.) skirting is present secure the heater through the outer slots.
-
Page 6: Operating Instructions
Conversely if the room temperature is too high this setting should be reduced. The input control should only require seasonal adjustments. Fenix Trading s.r.o. Slezská 2, 790 01 Jeseník Czech Republic tel.: +420 584 495 304 fax: +420 584 495 303 e-mail: fenix@fenixgroup.cz... - Page 8 Fenix Trading s.r.o. Slezská 2, 790 01 Jeseník Czech Republic tel.: +420 584 495 304 fax: +420 584 495 303 e-mail: fenix@fenixgroup.cz www.fenixgroup.cz...
Need help?
Do you have a question about the ECOSTATIC WMX706 and is the answer not in the manual?
Questions and answers