Introduction Of All Setting Functions - Lawmate PV-500EVO2 User Manual

Hide thumbs Also See for PV-500EVO2:

Table of Contents

Connect the two ends of A/B type of USB cable to PV-1000 and PC.

2 An indication for "USB Mode" appears on the screen for 5 seconds after the link is

properly installed.

Charging:

When the power goes down, power LED indictor blinks (green) and the meter with no

bars displays on the bottom right corner of the screen, which indicates that the power

of the host exhausts; please recharge it immediately. connect the main device with the

power supply and then plug the power supply into the electrical outlet. The LED light

will be on Orange.

Precaution:

The LED light will be turned off after finishing charging; to keep long life-

span of the battery, the power supply should be unplugged after finishing charging;

charge the battery last for 12 hours before 1st time to use

Introduction to all Setting Functions

01. Preview >

Tap SETTINGS on the screen to the page1 of setting functions then Tap Preview to start

setting each function as below.

Please

Table of Contents