Environmental And Product Recycling - Vileda Relax Plus Owner's Manual

Problem
Robot cannot find the Charging
Station.
Robot does not start scheduled
cleaning.
For further help, technical advice, or to order spare or replacement parts contact Vileda (address see
last page)

Environmental and Product Recycling

The Vileda Relax Plus fulfils the EU directive 2002/96/CE, covering Electrical and electronic appliances and the
management of its disposal.
The packaging material is entirely recyclable, and marked with the recycling symbol. Follow local regulations for
scrapping. Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of children's reach, as they are
potentially dangerous.
When the product has reached the end of its life please do not dispose of it with general household waste. To pre-
vent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources.
The symbol identifies the Vileda Relax Plus as a product submitted to the regime of selective electrical appli-
ance recycling collection.
The product contains a NiMH battery which should not be disposed of with general household waste. Deposit
the battery in an official collection point for its recycling.
Batteries can be detrimental for the environment and can explode if they are exposed to high temperatures.
The violation of these precautions could cause fire and / or serious injuries.
For more detailed information about treatment, recovery and recycling of this product, please contact your local
city office, your household waste disposal service or the shop where you purchased the product.
Possible reason
• Charging Station is not properly
connected to the mains.
• Charging Station is covered by
an obstacle.
• Obstacle sensors of robot or
docking sensor of Charging
Station are dirty.
• Charging Station is not
synchronized.
• Battery of robot is totally empty.
• Robot is turned off.
• Weekday for autonomous
cleaning is not selected.
Possible solution
• Plug the charger correctly to
the mains and to the Charging
Station and check if power
indicator lights up.
• Ensure there are no obstacles
within 3m in front of the
Charging Station and within
0.5m of its side.
• Clean the sensors with a dry
cloth.
• Synchronize Charging Station
(see section "Battery Charging
& Recharging").
• Charge the robot once
manually.
• Turn the robot on by pressing
the power switch.
• Select weekday for autono-
mous cleaning (see section
"Using the Product").
G
11