Environmental And Product Recycling; Battery Removal - Vileda Relax Owner's Manual

Problem
Battery does not recharge.
For further help, technical advice, or to order spare or replacement parts contact Vlieda (address see
last page).

Environmental and Product Recycling

The Vileda Cleaning Robot fulfils the EU directive 2002/96/CE, covering Electrical and electronic appliances and
the management of its disposal.
The packaging material is entirely recyclable, and marked with the
for scrapping. Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of children's reach, as they
are potentially dangerous.
When the product has reached the end of its life please do not dispose of it with general household waste.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources.
The symbol identifies the Vileda Relax Cleaning Robot as a product submitted to the regime of selective
electrical appliance recycling collection.
The product contains a NiMH battery which should not be disposed of with general household waste. Call, or
deposit the battery in an official collection point for its recycling.
Batteries can be detrimental for the environment and can explode if they are exposed to high temperatures.
The violation of these precautions could cause fire and / or serious injuries.
For more detailed information about treatment, recovery and recycling of this product, please contact your local
city office, your household waste disposal service or the shop where you purchased the product.
1. Turn off the power switch and turn the robot upside down.
2. Push both flaps inwards and pull up until battery pack comes out.
3. Reinstall battery by pushing until you hear a clicking sound.
WARNING: NEVER touch both metal battery terminals at the
same time with any metal objects as this will short circuit the
battery and may create sparks that can cause small burns.
Possible reason
• Battery is not installed correctly.
• Charger is not plugged in
correctly.

Battery Removal

Possible solution
• Reinstall battery by pushing
until you hear a clicking sound.
• Check that charger is plugged
in correctly to the outlet and to
the robot.
recycling symbol. Follow local regulations
G
13