Sanitas SBM 29 Instructions For Use Manual page 16

Measuring uncertainty
Sets of Memory
Unit Dimension
Unit Weight
Cuff Size
Operating Temperature
Storage-Temperature
Power Supply
Battery Life
Accessories
Classification
Key to symbols:
These specification are subject to change without notice for
purpose of improvement.
max. permissible standard devia-
tion according to clinical testing:
systolic: 8 mmHg/
diastolic: 8 mmHg
1 x 60 memory places
L137 x W97 x H55 mm
Approximately 260 g with
batteries
cuff for upper arm circumference
of 22 – 30 cm
+5 °C to +40 °C, 40 – 80% RH
-20 °C to +55 °C, 10 – 95 % RH
4 x 1,5 V AA batteries (alkaline
type LR6)
For approx. 180 measurements,
depending on blood pressure
level or inflation pressure
Instruction manu al, 4 pcs "AA"
battery
Application part Type B
Important! Read the
operating instruction!
Application part Type B
• This unit is in line with European Standard EN60601-1-2
and is subject to particular precautions with regard to elec-
tromagnetic compatibility (EMC). Please note that portable
and mobile HF communication systems may interfere with
this instrument. For more details, please contact customer
service at the address indicated.
• The instrument is in line with the EU Medical Products
Directive 93/42/EC, the German medical products act and
European standards EN1060-1 (non-invasive blood pres-
sure monitors, Part 1: general requirements) and EN1060-3
(non-invasive blood pressure monitors, Part 3: Supplemen-
tary Requirements for Electromechanical Blood Pressure
Measurement Systems).
• If you are using the instrument for commercial or economic
purposes, you must check measurement precision regularly
in accordance with the ‚Operators' Ordinance on Medical
Products'. Even in the case of private use, we recommend
checking measurement precision every two years at the
manufacturers.
16