Measuring Blood Pressure - Sanitas SBM 29 Instructions For Use Manual

Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Measured pulse
5. Pulse icon
Cardiac arrhythmia
icon
6. Number of memory space
7. Inflate/deflate arrow
8. ‚Change battery' icon
9. WHO classification
4. Prepare measurement
Inserting battery
• Remove the battery
cover from the back
of the monitor.
• Insert four AA 1.5 V
alkaline batteries.
Making absolutely sure that you in-
sert them with the correct polarity as
marked. Never use rechargeable batteries.
• Replace the battery cover carefully.
If the battery change „
urement is no longer possible and you must replace all the
batteries. Once batteries have been removed from the device,
the time must be reset. Any measurement results that have
been stored are however retained.
1
9
6
7
8
5
4
4xAA(LR6) 1,5 V
" is continuously illuminated, meas-
Used batteries do not belong in the household waste. You are
legally obliged to dispose of the batteries. Dispose of them
2 via your specialist electrical supplier or local collec ting point
for recyclable waste.
Note: Batteries containing pollutant substances
are marked as follows: Pb = Battery contains
lead, Cd = Battery contains cadmium, Hg = Bat-
3
tery contains mercury.
setting date and time
It is vital to set date and time. Only in this way is it possible
to save and subsequently retrieve your measured values with
the right date and time.
Time is shown in 24 hour format.
If you hold down ‚MEM', you can set the values faster.
note:
• Press ‚START/STOP' and ‚MEM' simultaneously. The year
starts flashing. Set the year with ‚MEM' and confirm with
‚START/STOP'.
• Set the month, day, hour and minute and confirm in each
case with ‚START/STOP'.

5. Measuring blood pressure

Positioning cuff
Fit the cuff round your bare left up-
per arm. Blood circulation in the arm
should not be restricted by tight
clothing or other objects.
12