Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Motor and Gear Section (cont.)
ASSEMBLING
3) Assemble Motor section. (Fig. 22)
Assemble Motor section and Gear section together while
turning Motor bracket in the direction of the arrow.
Then install Switch unit on Gear case, and connect Lead
wires of Endbell complete to Switch. (Fig. 26)
4) Put the assembly of Gear section and Motor section
in place on Housing (R), then fasten Housing (L) to
Housing (R) as drawn to left in Fig. 22.
Note:
Do not forget to install Plate and Lens on Housing (R).
See Figs. D-2 and D-3 for detailed information on wiring.
Fig. 26
Note:
Ribs to hold Switch unit must face
the top side of the machine.
ribs to hold
Switch unit
Gear section
Motor bracket
Motor section
P 10/ 14
Switch unit
Housing (R)
Lead wire
of Endbell complete
Advertisement
