Makita BFT082F Instruction Manual
Hide thumbs Also See for BFT082F:

Advertisement

INSTRUCTION MANUAL
Cordless Screwdriver
BFT041F
BFT082F
BFT124F
010995
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Summary of Contents for Makita BFT082F

  • Page 1 INSTRUCTION MANUAL Cordless Screwdriver BFT041F BFT082F BFT124F 010995 IMPORTANT: Read Before Using.
  • Page 2: Specifications

    Designation of Machine: The typical A-weighted noise level determined according Cordless Screwdriver to EN60745: Model No./ Type: BFT041F, BFT082F, BFT124F Sound pressure level (L ) : 70 dB(A) or less are of series production and Uncertainty (K) : 3 dB(A)
  • Page 3 Tomoyasu Kato interrupter (GFCI) protected supply. Use of an Director GFCI reduces the risk of electric shock. Makita Corporation Personal safety 3-11-8, Sumiyoshi-cho, 10. Stay alert, watch what you are doing and use Anjo, Aichi, 446-8502, JAPAN common sense when operating a power tool.
  • Page 4: Cordless Screwdriver Safety Warnings

    GEB050-2 before making any adjustments, changing accessories, or storing power tools. Such CORDLESS SCREWDRIVER preventive safety measures reduce the risk of SAFETY WARNINGS starting the power tool accidentally. 20. Store idle power tools out of the reach of Hold power tool insulated gripping...
  • Page 5: Functional Description

    Do not expose battery cartridge to water until it locks in place with a little click. If you can see or rain. the red part on the upper side of the button, it is not A battery short can cause a large current locked completely.
  • Page 6 NOTE: Lighting up the lamps Use a dry cloth to wipe the dirt off the lens of lamp. • Be careful not to scratch the lens of lamp, or it may 1. Lamp lower the illumination. LED indicator / Beeper 1.
  • Page 7 Lights up in red and A series of short stops. green alternatively beeps Take it to a Makita This function works Failure of motor Authorized Service when motor fails. centers. This function works when...
  • Page 8 Adjusting the fastening torque ASSEMBLY 1. Adjust grip CAUTION: 2. Ring Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bit or socket bit 007920 When you wish to drive machine screws, wood screws, hex bolts, etc.
  • Page 9: Operation

    If you need any assistance for more details regarding 007923 these accessories, ask your local Makita Service Center. Place the point of the driver bit in the screw head and Makita genuine battery and charger •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884968A222...

This manual is also suitable for:

Bft041fBft124fBft082fzBft041fz

Table of Contents