Playing The Sp-280; Playing A Single Sound (Single Mode) - Korg SP-280 Owner's Manual

Playing a single sound (Single mode)

You can select a sound from the thirty sounds supplied with the instrument (10
sounds x 3 banks).
Sound button Bank
PIANO1
PIANO2
E.PIANO1
E.PIANO2
HARPSI/CLAV
VIBES/GUITAR
ORGAN1
ORGAN2
STRINGS
CHOIR
(#) These columns show the number of oscillators per voice that are used by
each sound. (refer to "About maximum polyphony" on page 22.)
1. Press the sound button for the sound that you want to play.
The LED for that button will light up.
2. Press the BANK button to select one of the three sounds.
Each press of the BANK button switches the bank in the order 1, 2, 3, 1, ...,
and the corresponding LED to the right of the BANK button will light up.
For example, to select the electric grand piano sound, press the PIANO2 but-
ton, after which its LED lights up.
Then, press the BANK button twice to select bank 3 (electric grand piano);
the LED below and to the right of the BANK button will light up.
In addition, the bank selected for a sound button remains the same, even if a
different sound button is pressed.
Each time the SP-280 is turned on, the sound in bank 1 is selected for all
sound buttons.

Playing the SP-280

Sound name
1 Grand Piano
2 Classic Piano
3 Jazz Piano
1 Live Piano
2 Honky-Tonk
3 Elec.Grand
1 Stage E.piano
2 Bright E.Piano
3 Tremolo EP
1 Dig.E.Piano1
2 60's E.Piano
3 Dig.E.Piano2
1 Harpsichord
2 Clav
3 Synth Clav
1 Vibraphone
2 Marimba
3 Acoustic Guitar
1 Jazz Organ1
2 Jazz Organ2
3 Jazz Organ3
1 Pipe Organ1
2 Pipe Organ2
3 Positive Organ
1 Strings
2 Cinema Strings
3 Analog Strings
1 Aah Choir
2 Ooh Voices
3 Classical Choir
1
2
#
3
2
2
2
2
1
1
2
3
2
1
2
2
1
2
1
1
2
2
2
2
2
2
3
2
2
2
1
2
3
11