Clutch System; Clutch Adjustment - Honda TRX90X Owner's Manual

14 TRX90X-32HP26700.book 121 ページ ２０１３年８月５日 月曜日 午後２時２０分
Your ATV's shift-activated, wet, multiplate clutch is part of the
primary drive system. Proper adjustment allows a smooth, gradual
engagement when shifting gears.

Clutch Adjustment

Refer to Safety Precautions on page 94.
RIGHT SIDE
(1)
(2)
(1) lock nut
1. Make sure the ignition switch is OFF (w).
2. Loosen the lock nut (1).
3. Turn the clutch adjuster (2) counterclockwise until you feel slight
resistance.
4. Turn the adjuster 1/8 turn clockwise, then tighten the lock nut to
hold the adjuster in this position.
5. After adjustment, start the engine and test ride your ATV to be
sure the clutch is operating properly.
If you cannot get proper adjustment, or the clutch does not work
properly, the cable or clutch friction discs may be worn. See your
dealer or refer to official Honda Shop Manual.

Clutch System

(2) clutch adjuster
Servicing Your Honda
121