Clutch System - Honda FOURTRAX 2018 Owner's Manual

Your ATV's shift-activated, wet, multiplate clutch is part of the
primary drive system. Proper adjustment allows a smooth, gradual
engagement when shifting gears.
Clutch Adjustment
Refer to Safety Precautions on page 103.
LEFT FRONT
(1)
(2)
(1) lock nut
1. Make sure the engine is cool.
2. Make sure the ignition switch is OFF (w).
3. Remove the seat (page 114) and tank cover assembly (page 115).
4. Loosen the lock nut (1).
5. Turn the clutch adjuster (2) counterclockwise until you feel slight
resistance.
6. Turn the adjuster 1/4 turn clockwise, then tighten the lock nut to
hold the adjuster in this position.
7. After adjustment, start the engine and test ride your ATV to be
sure the clutch is operating properly.
8. Install the removed parts in reverse order of removal.
If you cannot get proper adjustment, or the clutch does not work
properly, the clutch friction discs may be worn. See your dealer or
refer to official Honda Shop Manual.

Clutch System

(2) clutch adjuster
Servicing Your Honda 151