Honda TRX90X Owner's Manual page 160

14 TRX90X-32HP26700.book 151 ページ ２０１３年８月５日 月曜日 午後２時２０分
Removal, Cleaning & Replacement
Refer to Safety Precautions on page 94.
Your ATV has an endless (riveted master link) type chain. It should
only be removed or replaced by your dealer.
The O-rings can be damaged by steam cleaning, high pressure
washers, and certain solvents.
1. Clean the side surfaces of the chain with a dry cloth. Use a high
flashpoint solvent such as kerosene – not petrol.
Do not brush the rubber O-rings.
Brushing will damage them. Use of a solvent may also damage
the O-rings.
2. Inspect the drive chain for possible wear or damage.
Replace the drive chain if it has damaged rollers, loose fitting links,
damaged O-rings, or otherwise appears unserviceable.
Replacement Chain:
DID 428V – 98LE or RK428 HOZ1 – 98LE
Drive Chain
Servicing Your Honda
151