Honda TRX90X Owner's Manual page 188

14 TRX90X-32HP26700.book 179 ページ ２０１３年８月５日 月曜日 午後２時２０分
Installation
1. Position the wheel.
2. Position the wheel nuts.
3. Hand-tighten the wheel nuts on the wheel, then lower the ATV
to the ground before tightening the nuts in a crisscross (rather
than circular) pattern to the specified torque:
54 N·m (5.5 kgf·m , 40 lbf·ft)
If a torque wrench was not used for installation, see your dealer as
soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
If You Have a Flat Tyre
Taking Care of the Unexpected
179