Engine Stop Switch - Honda TRX90X Owner's Manual

14 TRX90X-32HP26700.book 30 ページ ２０１３年８月５日 月曜日 午後２時２０分
Controls & Features

Engine Stop Switch

e r
The engine stop switch (1) is used to stop the engine in an
emergency. To operate, slide the switch to the OFF (r) position. The
switch must be in the RUN (e) position to start the engine, and it
should normally remain in the RUN (e) position even when the
engine is OFF.
If your ATV is stopped with the ignition switch ON (q) and the engine
stop switch OFF (r), the battery will discharge. Turn the ignition
switch OFF (w) to prevent battery discharge.
LEFT HANDLEBAR
(1)
(1) engine stop switch r OFF
e RUN
30
Indicators & Controls