Honda TRX90X Owner's Manual page 154

14 TRX90X-32HP26700.book 145 ページ ２０１３年８月５日 月曜日 午後２時２０分
Inspection
LEFT SIDE
20 – 30 mm
(0.8 – 1.2 in)
(1) drive chain
1. Measure the amount of chain slack midway between the
sprockets. Drive chain slack should allow the following vertical
movement by hand:
20 – 30 mm (0.8 – 1.2 in)
2. Check drive chain slack at several points along the chain. The
slack should remain constant. If it isn't, some links may be kinked
and binding. Lubricating the chain will often eliminate binding
and kinking.
NOTICE
Excessive chain slack may allow the drive chain to damage the
engine cases.
Drive Chain
(1)
(cont'd)
Servicing Your Honda
145