Identification Plate - Mastervolt whisper 15 ultra User Manual

INTRODUCTION
1.5.2

Identification plate

All required identification data are on the identification
plate. For location of the identification plate see figure 1
MODEL : Whisper 15 ULTRA
ARTICLE NO : 51107055
SERIAL NO :
MAX.POWER : 15kW (kVA) cos = 1
VOLTAGE : 120 - 240V
FREQUENCY : 60Hz
CURRENT : 122/62A
PHASE
: Single phase dual voltage
: 41,7" x 22,6" x 24,9"
DIMENSIONS
WEIGHT : 811 lbs (365 kg)
838
YEAR OF MANUFACTURING
Manufacturer : Mastervolt b.v.
Snijdersbergweg 93, 1105 AN Amsterdam
The Netherlands Tel. + 31 (0)20 3422100
Fig. 1: Location identification plate.
1 The identity of the generating set is given by the
SERIAL NUMBER.
Example:
SERIAL NO: : W822B001
version "B"
When this number is available the manufacturer can
trace the specifications of the generating set. On the
identification plate are also some basic features of the
set:
6
380
: 2006
/EPA
2 POWER
The identification plate gives the nominal maximum
continues load in kVA (= kW) calculated with power
factor one. When calculating a load one should
always take into account the power factor or cos phi
of this load. The power should never exceed the
nominal power as shown on the identification plate.
Power is rated at an ambient temperature of 104°F
(40°C) and a seawater temperature of 77°F (25ºC).
For higher temperatures the generating set has to be
derated.
3 VOLTAGE shows the nominal voltage.
This voltage should be within the specified tolerance
at the nominal frequency.
4 FREQUENCY is shown in Hz and is determined by
the speed of the engine (RPM). 60 Hz correlates with
1800 rpm.
5 CURRENT shows the maximum current that is
acceptable at the specified frequency, voltage and
power factor.
6 WEIGHT shows the net dry weight (approximately) in
kg. This is without fuel, oil, packing and external
installation equipment
7 CE-marking: the "CE" symbol shows that the
generating set is build according to European
Community safety regulations. This includes the
regulations regarding the safety of pleasure craft,
safety of machinery, electric safety and electric
magnetic compatibility (EMC) and other relevant
directives.
Safety also relies on the installation, application and
circumstances. See also the remarks in this manual under
SAFETY
Before changing a factory setting you are advised to
consult the manufacturer. When the generating set you
have to identify is not new you have to take into account
the possibility that former users may have changed the
settings. Check the settings (voltage, frequency, rpm)
when there is any doubt.
Copyright © 2008 Mastervolt / December 2008 / WHISPER 15 ULTRA / US