40 to 20KHz and ultimate convenience for desktop music production. LX4-2.1 is designed with option to add the LX4-3.0 package, upgrading the LX4-2.1 into a 5.1 system for music production or playback of 5.1 music and sound tracks.This feature makes the LX4 system extremely flexible, fitting into all modern digital music production and playback applications.
5. Network & Power Amplifiers - the active equalization and crossover networks, as well as the power amplifiers for the LX4-2.1 are specially designed for the specific woofer, tweeter and sub-woofer chosen. The network properly distributes low, mid, and high frequencies to the components in order to reduce distortion and loss of signal, thereby achieving a naturally balanced sound.
Front and Rear Panel Features Rear Panel 1. TRS Inputs: These jacks accept 1/4” connections with either balanced or unbalanced wiring. For balanced wiring, a three-conductor TRS plug is necessary.The input wiring of a TRS connector should be as follows: TRS TIP - Signal positive (+) TRS RING - Signal negative (–) TRS SLEEVE - Signal ground (Shield)
5. Speaker Outputs: (5) spring-type Speaker Output terminals for connecting (5) Channel Amplifier Outputs to all speaker channels, as follows: L: Use Speaker wire included in the LX4-2.1 package to connect the L channel amplifier output to the Left Speaker.
Precautions Handling: Please do not touch the speaker cones.The LX4-2.1 set is packaged in the box tightly, so your attention is required when taking the monitors out of the box. To avoid possible damage to the speaker units, hold both sides of the monitor in order to pull it out of the box.
Speaker Wire Connections Use speaker wires included in LX5-2.1 package to connect the Left and Right Channel Speaker outputs to the Left and Right Speakers. Connecting to Preamp, Computer or Game Console Outputs Before connecting, make sure the output device’s power has been turned off. Plug the TRS balanced or TS unbalanced cable to the corresponding output connectors of a pre-amplifier, computer or game console.
LX4s performing to their maximum capability, an appropriate listening environment and correct placement are required. Please refer to the following for correct LX4-2.1 placement. 1. As a subwoofer is non-directional,you can place the subwoofer box at any convenient location, and then use the speaker wires to hook the Left and Right Speakers to the L &...
For additonal help, contact M-Audio Technical Support by telephone (626-445-7556, 9-5 PST M-F), by fax (626-445-8407) or by e-mail (techsupt@m-audio.com). If you have any questions, comments or suggestions about this or any M-Audio product, we invite you to contact us directly at: M-AUDIO U.S.
In the event that repair is required, a Return Authorization number must be obtained from M-AUDIO. After this number is obtained, the unit should be shipped back to M-AUDIO in a protective package with a description of the problem and the Return Authorization clearly written on the package.
Appendix A - Technical Specifications Type: 3-way studio reference with subwoofer – 2.1 System, expandable to 5.1 Subwoofer Driver: 8 inch diameter, specially-developed curved-profile pulp cone, high-temperature voice coil and damped closed cell foam surround - designed for sub-frequency pressure levels with very high efficiency and extremely low distortion LF Driver: 4-inch dia., magnetically-shielded with curved mineral-filled polypropylene cone, high temperature voice coil and damped closed cell foam surround...
Need help?
Do you have a question about the LX4-2.1 and is the answer not in the manual?
Questions and answers