Table of Contents
Advertisement
Studiophile SP-5B
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
What's in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Studiophile SP-5B Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1. Woofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2. Tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3. Sub-Frequency Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
4. Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
5. Network & Power Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Rear Panel: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Front Panel and Side View: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
XLR Balanced Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
TRS Balanced/Unbalanced Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Connecting to the Corresponding Pre-Amplifier, Computer or Game... . . . . . . .7
Placing the SP-5Bs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Appendix A - Technical Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Appendix B - Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
One Year Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Users Manual
Advertisement
Table of Contents
Related Manuals for M-Audio SP-5B Studiophile Series
Summary of Contents for M-Audio SP-5B Studiophile Series
-
Page 1: Table Of Contents
Studiophile SP-5B Users Manual Introduction ............2 What’s in the Box? . -
Page 2: Introduction
Introduction Thank you for choosing the SP-5B Studiophile Series pair of bi-amplified powered near field reference monitor speakers. M-Audio is well known for their digital audio interface technology, digital converters, audio pre amps and mixers. Now, after long research and development, the Studiophile SP-5B is born to change the concept of near field reference monitoring. -
Page 3: Tweeter
2. Tweeter By employing a specially developed 1" silk dome with magnetic shielding, the tweeter can deliver distortion-free original sound and offer extremely natural sound. It minimizes reaction time by using fabric silk for excellent delivery, and also minimizes resonance by adapting a unique Internal Damping Technology. 3. -
Page 4: Rear Panel
Rear Panel: 1. XLR INPUT: This jack accepts XLR input connections, with either balanced or unbalanced wiring. The signal of the XLR INPUT is summed together with the TRS INPUT through a balanced input amplifier. So, either may be used as an input or mixed together. -
Page 5: Front Panel And Side View
3. PRODUCT LABEL: This label contains the model and serial number information. 4. VENT PORT: This port aids in reproduction of very low frequencies by discharging frequencies below 30 Hz.. 5. VOLUME CONTROL: Use the Volume Control to set the output sound pressure from the SP-5B to proper levels as required. -
Page 6: Installation
Installation For optimal performance of the SP-5B, please read the following thoroughly and carefully prior to installation. Precautions Handling: Please do not grab the speaker driver units: the SP-5B set is packaged in the box tightly, so your attention is required when taking the speakers out of the box. -
Page 7: Connecting To The Corresponding Pre-Amplifier, Computer Or Game
balanced connection TRS Balanced or Unbalanced Connection Connecting to the Corresponding Pre-Amplifier, Computer or Game Console Outputs Before connecting, make sure its power is turned off. Plug the XLR balanced, TRS balanced or unbalanced cable to the corresponding output connectors of a pre-amplifier, computer or game console. -
Page 8: Placing The Sp-5Bs
Placing the SP-5Bs Placing the speakers is one of the most important procedures in order to monitor sound accurately. To monitor with the SP-5Bs at their maximum capability, an appropriate listening environment and correct placement is required. Please, refer to the following in order to place the SP-5Bs correctly. 1. - Page 9 3. Place the SP-5Bs vertically. Placing the SP-5Bs horizontally is not recommended. Remarks: DO NOT place any obstacles that may block the flow of air in front or between the SP-5Bs (which are a medium of sound, or create reflected sound, especially materials of high reflective tendencies including glass, mirror or metal).
-
Page 10: Appendix A - Technical Specs
Appendix A - Technical Specs Type: 2-Way Near Field LF Driver: 5 1/4" magnetically-shield mineral-filled polypropylene curved cone with high temperature voice coil and damped rubber surround HF Driver: 1" magnetically-shield natural Silk Dome Frequency Response: 33Hz - 22kHz Crossover Frequency: 2.7kHz LF Amplifier Power: 42W HF Amplifier Power: 33W S/N Ratio: >... -
Page 11: Appendix B - Block Diagram
Appendix B - Block Diagram... -
Page 12: One Year Warranty
One Year Warranty MIDIMAN warrants that this product is free of defects in materials and workmanship under normal use for a period of one year from purchase date, so long as the product is: owned by the original purchaser; the original purchaser has proof of purchase from an authorized MIDIMAN dealer;...
Need help?
Do you have a question about the SP-5B Studiophile Series and is the answer not in the manual?
Questions and answers