Technical Data - Silvercrest KH 1171 Operating Instructions Manual

• To reassemble the appliance lid
hinge cams through the opening of the hinge
guides.
Baking moulds and kneading paddles
The surfaces of the baking moulds
ding paddles have a non-stick coating. When
cleaning the appliance do not use aggressive
detergents, cleaning powders or objects that may
cause scratches to the surfaces.
Due to moisture and vapours the surfaces of
various parts may undergo changes in their appe-
arance over a period of time. This has no influence
on the function nor does it reduce the quality of the
baking results.
Before cleaning, take the baking moulds
kneading paddles out of the baking area.
Wipe the outside of the baking moulds
damp cloth.
Important
Never submerse the baking mould
other liquids.
Clean the interior areas of the baking mould
with warm soapy water.
If the kneading paddles
difficult to dissolve, fill the baking mould
water for approx. 30 minutes.
If the mountings of the kneading paddles
clogged, you can clean them carefully with a wooden
toothpick.
Do not use any chemical cleaning agents or solvents
to clean the Bread Baking Machine.
, guide the
and knea-
and
with a
in water or
are encrusted and it is
with hot
are

Technical data

Model:
Nominal voltage:
Power consumption:
Disposal
Do not dispose of the appliance in
your normal domestic waste. This pro-
duct is subject to the European guideli-
ne 2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
- 65 -
Bread Baking Machine
KH 1171
220-240V ~ 50Hz
850 Watt