Cabinet Models; 箱体模型 - Vox ToneLab ST Owner's Manual

Hide thumbs Also See for ToneLab ST:
Table of Contents

Advertisement

Since active-circuit tone controls are used on this model as well,
a wide range of tonal variety can be obtained.
CST(定制型)
这是一个原始的放大器模型,基于近期的一款高增益放大器,其显著特点是,丰
富而热情的中频音色,还有强劲的维持音。
自从有源电路音调控制器被应用于这款模型, 更大范围的音调多样化设置都可以
做出来。

Cabinet models

音箱模型
These simulate the acoustical character of a guitar amp's cabinet.
这些模拟吉他放大器音箱箱体的声学特性。
1. TWEED 1x8
This is an open back cabinet containing an 8-inch 3.2 ohm Alnico
speaker, found in simple amplifiers with a 6V6 output tube.
1、TWEED 1x8
这是一个开放型箱体,提供了 8 英寸 3.2 欧姆的 Alnico 扬声器,常见于 6V6 输
出的电子管型简易放大器。
2. TWEED 1x12
This cabinet has an important influence on the sound of the
Tweed 1x12 amp. The speaker uses an Alnico magnet.
2、TWEED 1x12
这个箱体对于 Tweed 1x12 放大器的声音有着重要的影响。该扬声器使用了
Alnico 磁体。
3. TWEED 4x10
This is an open back cabinet containing four 10-inch 8 ohm
speakers connected in parallel for a 2 ohm impedance.
3、TWEED 4x10
这是一个开放型箱体,提供了四个 10 英寸的 8 欧姆扬声器,通过 2 欧姆阻抗平
行的连接。
4. BLACK 2x10
This is the cabinet of a 35W open back combo amp containing

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents