Cable Assembly Connectors - National Instruments 6527 User Manual

Cable Assembly Connectors

© National Instruments Corporation
Table 3-1. Port Functionality for 6527 Devices
Port
0
1
2
3
4
5
The optional R1005050 cable assembly you can use with the 6527 device
is an assembly of two 50-pin cables and three connectors. Both cables are
joined to a single connector on one end and to individual connectors on the
free ends. The 100-pin connector that joins the two cables plugs into the
I/O connector of the 6527 device. The other two connectors are 50-pin
connectors, one of which is connected to pins 1 through 50 and the other to
pins 51 through 100 of the 6527 device connector. Figure 3-2 shows the pin
assignments for the 50-pin connectors on the cable assembly.
Chapter 3
Function
Output with readback
Output with readback
Output with readback
3-3
Making Signal Connections
Input
Input
Input
6527 User Manual