Configuring The 6527 - National Instruments 6527 User Manual

Configuring the 6527

© National Instruments Corporation
Your 6527 is now installed. You are now ready to configure your hardware
and software.
Your 6527 device is completely software configurable, and you do
not need to perform any configuration steps after the system powers up.
The PCI-6527 is fully compliant with the PCI Local Bus Specification,
Revision 2.0, and the PXI-6527 is fully compliant with the PXI
Specification, Revision 1.0. Therefore, all board resources are
automatically allocated by the PCI system, including the base
address and interrupt level. The board's base address is mapped
into PCI memory space.
Chapter 2
2-3
Installing and Configuring the 6527
6527 User Manual