Calibration
Specification
Self-Calibration An onboard, 24-bit ADC and precision voltage reference are
used to calibrate the DC gain and offset. The self-calibration
is initiated by the user through the software and takes
approximately 90 seconds to complete.
External
The External Calibration calibrates the VCXO, voltage
Calibration
reference, DC gain, and offset. Appropriate constants are
stored in nonvolatile memory.
Calibration
Specifications valid within two years of External
Interval
Calibration.
Warm-up Time
15 minutes
© National Instruments Corporation
Table 11.
Value
29
Comments
—
—
—
—
NI 5422 Specifications