Advertisement
When the device is initially installed, the Windows alert message may display the
Note
following:
until the custom name appears and the Found New Hardware Wizard is launched. This alert
message device name cannot be changed.
Note
Modifying the INF file will not change the USB-5132/5133 OEM device name in
Measurement & Automation Explorer (MAX).
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.
Refer to the Terms of Use section on ni.com/legal for more information about National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade
names of their respective companies. For patents covering National Instruments products/technology,
refer to the appropriate location: Help»Patents in your software, the patents.txt file on your
media, or the National Instruments Patent Notice at ni.com/patents.
© 2008 National Instruments Corporation. All rights reserved.
When you reconnect and power on the device, it appears as
the Found New Hardware Wizard and Windows Device Manager, as shown
in Figure 9.
Found New Hardware: USB 513x
Figure 9. "My Device" in the Found New Hardware Wizard and
. This message appears for a few seconds
Device Manager (Windows 2000)
My Device
372530A-01
Aug08
in
Advertisement
