National Instruments SCB-68 User Manual page 85

Soldering and Desoldering
on the SCB-68
If the kit is missing any of the components in Figure E-1, contact NI by selecting
Note
Contact NI at
© National Instruments Corporation
Some applications discussed here require you to make modifications to the
SCB-68, usually in the form of adding components to the printed circuit
device.
To solder and desolder components on the SCB-68, refer to Figure 2-1,
SCB-68 Printed Circuit
following steps to remove the SCB-68 from its box.
10
9
8
1 Quick Reference Label
2 Cover
3 68-Pin Connector
Screws
Figure E-1. SCB-68 Parts Locator Diagram
.
ni.com
Diagram, and to Figure E-1, and complete the
7
4 Lock Washers
5 Shielding Screws
6 68-Pin I/O Connector
7 Base
E-1 SCB-68 Shielded Connector Block User Manual
E
1
2
3
4
5
6
8 Strain-Relief Bars
9 Strain-Relief Screws
10 Circuit Card Assembly