National Instruments SCB-68 User Manual page 27

Chapter 2 Parts Locator and Wiring Guide
Temperature Sensor
S5 S4 S3
Direct feedthrough, with temperature sensor disabled and
accessory power disabled
Temperature Sensor
S5 S4 S3
Temperature sensor disabled, and accessory power enabled
Note: This configuration is the factory-default configuration.
SCB-68 Shielded Connector Block User Manual
Table 2-1. Switch Configurations and Affected Signals
Switch Setting
Signal Conditioning
Circuitry Power (Off)
Signal Conditioning
Circuitry Power (On)
Analog input, analog output,
digital I/O, and timing I/O
S1
S2
Analog input
and analog output
S1
S2
2
2-4
Applicable Signals
1
ni.com