DeWalt D28116-XE Instruction Manual page 7

FIG. 1
D28136-XE
B
A
C
F
S
E
F
E
G
H
5
Keyless Guard
The keyless guard (C) allows for quick adjustment during the application to enhance
application versatility.
Dust Ejection System
The dust ejection system prevents dust pile-up around the guard and motor inlet, and
minimises the amount of dust entering the motor housing.
Soft Start Feature
D28116, D28117, D28133, D28136, D28137
The soft start feature allows a slow speed build-up to avoid an initial jerk when
starting. This feature is particularly useful when working in confined spaces.
Electronic Variable Speed Control
D28116, D28117, D28136, D28137
The electronic variable speed control (E) offers added tool control and enables the tool
to be used at optimum conditions to suit the accessory and material.
Autobalance Feature
D28117, D28137
The auto balance feature continuously adjusts the balance to reduce the vibration of
the machine when it is running. This improves user comfort during the operation and
is particularly useful when using the machine for long periods of time.
Clutch
The torque limiting clutch reduces the maximum torque reaction transmitted to the
operator in case of jamming of a cutting disc. This feature also prevents the gearing
and electric motor from stalling. The torque limiting clutch has been factory-set and
cannot be adjusted.
No-volt Release Switch
The on/off switch (A) has a no-volt release function. If the power be shut off for some
reason, the switch has to be deliberately reactivated.