Advanced Console Functions - True Fitness ES900 Owner's Manual

CHAPTER 4B: EMERGE OPERATION

ADVANCED CONSOLE FUNCTIONS:

WARNING:
Misconfiguration of the console may cause damage to the unit and void the manufacturer warranty. If necessary, please
contact TRUE Fitness Technical Support at 800-883-8783 for assistance.
Entering Diagnostics Mode:
With the console powered up
Press and hold the + WORKLOAD key for 10 seconds or until the console beeps. NOTE: If the sound is turned off no
beep will be emitted from the console.
Continue holding the +WORKLOAD key and simultaneity press the ENTER key.
Use the + or - WORKLOAD keys to select SETUP then press ENTER
Use the + or - WORKLOAD keys to scroll through the available options then press ENTER to select
Use the + or - WORKLOAD keys to adjust options then press ENTER
Use the + or - WORKLOAD keys to scroll to the end of the options list then press ENTER to Exit.
Available options:
• Display Units (English, German, French or Spanish language
• Time (Sets the default program time)
• Weight (Sets the default user weight)
• Pause Duration (Time the console will wait before resetting when in a program)
• Sleep (Sets the time the unit sit unused before the console goes into sleep mode)
• Sound (on or off)
• RPM (Not used)
Setting the Sleep Timer:
The following steps allow the Sleep Timer (time without use after which the console will go dim) to be adjusted. The
default Sleep Timer is 30 minutes*.
STEP 1: Press and hold the "Workload +" button until you hear a beep. Continue to hold the "Workload +" button
STEP 2: While holding the "Workload +" button, press the "Enter" button. Release both buttons.
STEP 3: The console display window should read "ENTER MODE SEL". If this is not visible, repeat steps 1 & 2.
STEP 4: Use the "Workload +" and "Workload -" buttons to cycle through the menu.
STEP 5: When the display window reads "SETUP", press the "Enter" button.
STEP 6: Use the "Enter" button to cycle through the console setup menu**
STEP 7: When the display window reads "SLEEP TIMER", use the "Workload +" and "Workload -" buttons to adjust the
Sleep Timer feature
STEP 8: Press and hold the "Enter" button to exit
*If a workout has been paused, the Sleep Timer does not begin until the Pause Timer is complete.
Truefitness.com / 800.426.6570 / 636.272.7100 45