Omnitronic CDP-600 User Manual page 24

10. MAIN TEMPO-BUTTON
With the MAIN TEMPO-button, you can adjust the pitch of an adjusted playback speed. Press the MAIN
TEMPO-button in order to adjust the pitch.
11. PITCH-BUTTON
With this button, you can switch the speed-adjustment via the pitchfader off (press and hold). You can also
select the speed-adjusting range between ±4 %, ±8 % or ±16 % by repeatedly pressing the Pitch-button.
12. PITCH BEND-BUTTONS
With the Pitch Bend-buttons, you can adjust the playback-speed temporarily by ±16 %. Furthermore, you
can synchronize the bass-beat of two different signal-sources with these buttons. Please refer to 6.6
Synchronisation of the playback-speed.
13. PITCHFADER
You can adjust the desired speed with the Pitchfader. The display shows the current percentage or the
current beats per minute (BPM).
14. RELAY-BUTTON
By pressing the Relay-button, the playback automatically switches to the other player. Please refer to 6.9
Relay-operation.
15. BOP-BUTTON
When calling the Cue-point via the Bop-button the player remains in the play-mode.
16. CUE-BUTTON
Pause-mode:
In the pause-mode, you can cue by pressing and holding the Cue-button. As soon as you let the Cue-button
loose, the player returns to the track-start or the Cue-point.
Playback-mode:
If you press the Cue-button during playback, the player returns to the track-start or the Cue-point and goes
into Pause-mode.
Please refer to the explanations under 6.7 Cueing.
17. TRACK-BUTTONS
Via the Track-buttons, you can select the desired track. Please refer to the explanations under 6.5 Selecting
a track via the Track-buttons.
18. PLAY/PAUSE-BUTTON
With the Play/Pause-button, you can start the playback and stop it again. Please refer to the explanations
under 6.4 Play/Pause.
19. SEARCH-BUTTONS
Pause-mode:
To cue and reverse at a very low speed. You can exactly select the starting-point or cue-point. The selected
frame is repeated until you press the Play-button.
Playback-mode:
Use the Search-buttons in order to cue and reverse at a very high speed.
20. A-BUTTON
By pressing the A-button, you can program the Loop In-point of a sequence which will be repeated then.
Please refer to the explanations under 6.8 Memorizing a sequence (Loop-function).
21. B-BUTTON
By pressing the B-button, you can memorize the Loop Out-point. The player will repeat the memorized
sequence until you press the Exit-button more.
22. EXIT/RELOOP-BUTTON
Via the EXIT/RELOOP-button, you can call up a memorized sequence once more.
23. TIME-BUTTON
By using the Time-button, the time-indication can be switched from track remain time (Remain) to track
playback time (Elapsed) or total remain time (Total Remain).
Press and hold the Time-button and the CD-player will be stopped.
24/55
10602320_V_1_0.DOC