Cutting Without An Attachment - Silvercrest SHBS 1000 A1 Operation And Safety Notes

Cutting length comb
attachment 6 (mm)
22 - 24
28 - 30
* Please note that the actual cutting lengths may deviate from the
cutting lengths given here, depending on the cutting angle.
j
A lways cut off small amounts at a time.
j
G uide the hair and beard clippers slowly through the hair.
j
H old the device so that the selected cutting length comb attachment
is always lying as flat on the scalp as possible.
6
j
A lways cut from the neck towards the top of the scalp or from the
forehead and temples upwards towards the centre of the scalp.

Cutting without an attachment

Q
CAUTION! DANGER OF INJURY!
The cutter head is very sharp!
Without a cutting length comb attachment
cut hair to a length of between 0.5 mm and 2.5 mm. Slide the sliding
switch to finely adjust the cutting length to the desired value.
2
Note: By varying how and at what angle you hold the hair clippers,
you can depart from the cutting lengths indicated in these instructions
for use or marked on the attachment / device.
Cutting lengths*
with cutting length fine adjustment (mm)
0.5 1.2
22.0 22.7
28.0 28.7
1.9 2.5
23.4 24.0
29.4 30.0
in place, the device can
6
Use
GB 17