Cleaning The Housing; Cleaning Your Hair And Beard Clippers - Silvercrest SHBS 1000 A1 Operation And Safety Notes

j
N ever touch the mains adapter with wet hands when you insert
or pull out the adapter from the mains socket.
j
A lways keep the mains adapter and connection lead dry.
WARNING!
water or other liquids for cleaning as the device is not waterproof.
Failure to observe this advice could damage the electrically conducting
parts (rechargeable batteries).

Cleaning the housing

Q
j
C lean the housing using a slightly moist cloth.

Cleaning your hair and beard clippers

Q
j
S witch off the hair and beard clippers by pressing the ON / OFF
switch .
3
j
D isconnect the lead from the device and pull the plug-in mains
adapter out of the mains socket.
j
T ake any fitted cutting length comb attachment
j
W ash the cutting length comb attachments
holding them under flowing water.
j
T hen fully dry the attachments.
j
U sing your thumb from the front of the device, press against the
teeth of the cutter head to release the blade set
(see Fig. B).
j
U se the supplied cleaning brush to remove any remaining hair
residue from the blade set
Do not immerse the hair and beard clippers in
.
1
Cleaning and care
off the device.
6
when necessary by
6
from its mount
1
GB 19