Table of Contents
Advertisement
Getting Started
Installing NI-DAQmx
Installing Other Software
© National Instruments Corporation
The NI 6124 and NI 6154 are simultaneous sampling multifunction I/O
devices (S Series) that use the DAQ-STC2 ASIC.
The NI 6124 S Series is a non-isolated device featuring PXI Express
connectivity, four simultaneously sampling 16-bit analog inputs,
two 16-bit voltage analog outputs, 24 lines of bidirectional DIO,
and two general-purpose 32-bit counter/timers.
The NI 6154 S Series is an isolated PCI device featuring four isolated
differential 16-bit analog inputs, four isolated 16-bit analog outputs,
six DI lines, four DO lines, and two general-purpose 32-bit counter/timers.
If you have not already installed your device, refer to the DAQ Getting
Started Guide. For specifications arranged by S Series device family, refer
to the specifications document for your device on
Before installing your DAQ device, you must install the software you plan
to use with the device.
The DAQ Getting Started Guide, which you can download at
, offers NI-DAQmx users step-by-step instructions for installing
manuals
software and hardware, configuring channels and tasks, and getting started
developing an application.
If you are using other software, refer to the installation instructions that
accompany your software.
1-1
1
.
ni.com/manuals
ni.com/
NI 6124/6154 User Manual
Advertisement
Table of Contents
