Electromagnetic Compatibility; Waste Electrical And Electronic Equipment (Weee) - National Instruments Module SCXI-1503 User Manual

Appendix A Specifications
Safety
Note For UL and other safety certifications, refer to the product label or visit
ni.com/certification
appropriate link in the Certification column.

Electromagnetic Compatibility

Note For EMC compliance, operate this device according to product documentation.
CE Compliance
Refer to the Declaration of Conformity (DoC) for this product for any additional
Note
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification
appropriate link in the Certification column.

Waste Electrical and Electronic Equipment (WEEE)

EU Customers
center. For more information about WEEE recycling centers and National Instruments
WEEE initiatives, visit
SCXI-1503 User Manual
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN-61010-1
• UL 61010-1, CSA 61010-1
, search by model number or product line, and click the
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
• EN 61326 EMC requirements; Minimum Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
• 73/23/EEC; Low-Voltage Directive (safety)
• 89/336/EEC; Electromagnetic Compatibility Directive (EMC)
, search by model number or product line, and click the
At the end of their life cycle, all products must be sent to a WEEE recycling
ni.com/environment/weee.htm
A-6
.
ni.com