Changing Direction of the Drain Hose
Only for AVXWH
You can select the direction of the drain hose depending on the place
you want to install the indoor unit.
1
Detach the rubber cap with the flyer.
2
Detach the insulation(FOAM-PE).
3
Detach the drain hose by pulling it and turning to the left.
4
Insert the drain hose by fixing them into the groove of the drain hose and
the outlet of the drain pan.
5
Insert the insulation(FOAM-PE) to prevent water leakage.
6
Stick the rubber cap with the screwdriver by turning it to the right until it
fixes to the end of the groove.
Screws hole
Drain hose
Drain pan outlet
Rubber cap
Insulation
Screw
21
E-