Table of Contents
Advertisement
EEV Kit Installation (Continued)
Wiring & Assigning address
Room A
Room B
Room C
14
E-
1
Connect the AC power cable and communication cable from the unit to
terminal, then connect the cable to another EEV Kit.
2
Connect the AC power cable and communication cable to each indoor unit
(A, B and C).
3
EEV kit address should be set same with connected indoor units main
address.
For Example
When Main address is set as "03" that connected in pipe "A",
the EEV kit "A" address should be set as "03".
A
Another
EEV Kit
Outdoor
unit
Advertisement
Table of Contents
