Table of Contents
Advertisement
Electronic Works
22
E-
Power and communication cable connection
1
Before proceeding to electronic works, you must turn off the circuit breaker.
2
Indoor unit power should be supplied through the breaker(MCCB, ELB)
separated by the power.
3
The power cable should be used only copper wires.
4
Connect the power cable{1(L), 2(N)} among the units within maximum length
and communication cable(F1, F2) each.
5
Connect V1, V2(for DC12V) and F3, F4(for communication) when installing
the wired remote controller.
Outdoor unit
220-240V~
Indoor Unit 1
Indoor Unit 2
Indoor Unit 3
Wired Remote
Controller
Advertisement
Table of Contents
