Table of Contents
Advertisement
Connection of refrigerant piping & Insulation
1
Insert bot anchors, use existing ceiling supports or construct
a suitable support.
Ensure the ceiling is strong enough to support the weight
Caution
of the indoor unit. Before hanging the unit, test the
strength of each attached suspension bolt.
2
Connect the "IN" refrigerant pipe to the unit.
3
Connect the "OUT" refrigerant pipe to each indoor unit(A, B and C).
The liquid and gas pipes should not be crossed when piping connection.
4
Insulate the connection piping. A joint part of pipe needs double
thickness of insulation.
5
The EEV kit has to be installed that the user has no access to it.
(built-in type)
Nylon band
EEV Kit
body
13
E-
Advertisement
Table of Contents
