Getting Started
Installing NI-DAQmx
Installing Other Software
Installing the Hardware
Device Pinouts
© National Instruments Corporation
NI USB-621x devices feature up to 32 analog input (AI) channels, up to
two analog output (AO) channels, two counters, and up to eight lines
of digital input (DI) and up to eight lines of digital output (DO), or
32 bidirectional static DIO lines. If you have not already installed your
device, refer to the NI-DAQmx for USB Devices Getting Started Guide.
Before installing your DAQ device, you must install the software you plan
to use with the device.
The NI-DAQmx for USB Devices Getting Started Guide, which you can
download from
ni.com/manuals
instructions for installing software and hardware, configuring channels and
tasks, and getting started developing an application.
If you are using other software, refer to the installation instructions that
accompany your software.
The NI-DAQmx for USB Devices Getting Started Guide contains
non-software-specific information about how to install USB devices.
Refer to Appendix A,
pinouts.
, offers NI-DAQmx users step-by-step
Device-Specific
Information, for USB-621x device
1-1
1
NI USB-621x User Manual
Need help?
Do you have a question about the Data Acquisition Device NI USB-621x and is the answer not in the manual?