Light Fittings - Tayana -48 Owner's Manual

Jam
Fruit juice
Ballpoint pen
Wine/Soft drinks
Fat/Oil

2.24 Light Fittings

For taking care of light fittings, you should follow these rules.
（1） Keep salt water away
（2） Wash lamps at intervals, using a soft cloth and fresh water.
Polish very lightly with soft cloth to avoid scratching the
lacquer
（3） Never use thinner. Thinner may remove the lacquer away.
（4） Do not polish lacquer with common polishes or abrasives.
To keep your beautiful light fittings for years, you should follow
the lamp manufacturer's instruction as follows:
（1） Treat each lamp with liquid wax once or twice a season.
Following the wax makers' instruction. Do not use any wax
with abrasive or silicone based.
（2） Avoid sea spray to brass fittings.
with a solution
denatured alcohol and 70%
water. Then shampoo. Lemon
juice also can give good
results
Pat with warm water
If necessary use ethyl alcohol
Use denatured alcohol
Use water and vinegar 50%
and shampoo
Pat with denatured alcohol and
shampoo
71
of 30%