Battery Charger - Tayana -48 Owner's Manual

your inlet fittings from damage and to prevent the
inlet circuit breaker from tripping, do not exceed 30
Amperes current draw.
！
Never rotate the shore power select switch under
load.

3.23.9 Battery Charger

The on board AC to DC battery chargers change 220 V AC input
into 12V DC and 12 C DC output to charge the battery banks.
When the batteries are fully charged, the charger maintain a
trickle charge condition. These chargers are sophisticated, multi
stage chargers and require little maintenance. Please read the
owners manual provided.
It recommends that the chargers normally be left in the ON
position with either shore power or the generator supplying the
power. Battery charge system schematic is as drawing attached.
105