Shore Power - Tayana -48 Owner's Manual

（3） Set the select switches to GEN
（4） Set the circuit breakers for the desired appliances and
equipment to ON or OFF
NOTE：
Keep clear of any moving parts or any machinery
while it is operating.
NOTE：
Never rotate the select switches under load.
Stopping the Generators
（1） Turn off all AC breakers
（2） Rotate AC select switches to the OFF position.
（3） Press STOP switch and hold until generator stops.
！
AC electric power can be dangerous. Do not attempt
to service a system unless you are thoroughly
familiar with and experienced in performing such
services. Do not forget to turn off all AC power
source before attempting repair.
DO NOT FORGET THE INVERTER！

3.23.8 Shore Power

Your TAYANA48DS has two 220-volt AC power inlets,
Connecting either shore cords provides your vessel's 220 volt
AC power. Each inlet and circuit breaker is rated at 30 amperes.
！
Each shore inlet is rated at 50 Amperes. To protect
104