Connecting Hdmi Equipment - Pioneer pdp-506hdg Operating Instructins

Enjoying through External Equipment
11

Connecting HDMI equipment

Media Receiver (rear view)
I N OUT
SERVICE ONLY
CONTROL MONITOR OUT
R-AUDIO-L
INPUT 3
ANT IN
INPUT 2
Y C B /P B
R-AUDIO-L VIDEO S-VIDEO
SUB
WOOFER
INPUT 1 COMPONENT VIDEO
Audio cable (commercially available)
Make this connection when inputting
analog audio signals.
To activate the HDMI terminal:
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "HDMI Input" ( /
4
Select "Setting" ( /
5
Select "Enable" ( /
Item Description
Disable Deactivates the HDMI terminal.
(factory default)
Enable Activates the HDMI terminal.
6
Press HOME MENU to exit the menu.
To specify the type of digital video signals:
1
Repeat steps 1 to 3 provided for "To activate the HDMI
terminal".
2
Select "Video" ( /
3
Select the type of digital video signals ( /
• If you select "Auto", an attempt will be made to identify
the type of digital video signals when digital video
signals are received.
Item Description
Auto Automatically identifies input digital video signals.
(factory default)
Color-1 Sets the format of digital video signals to the
Component 4:2:2.
Color-2
Sets the format of digital video signals to the
Component 4:4:4.
Color-3
Sets the format of digital video signals to the RGB.
4
Press HOME MENU to exit the menu.
48
En
VIDEO
C R /P R HDMI
BLACK WHITE
INPUT 3 SYSTEM CABLE
HDMI cable
(commercially available)
HDMI equipment
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
NOTE
• If you select a parameter other than "Auto", make such a
setting that results in natural color.
• If no image appears or images appear in inappropriate
colors, specify another digital video signal type.
• For the digital signal types to be specified, check the
AC IN operation manual that came with the connected equipment.
To specify the type of audio signals:
1
Repeat steps 1 to 3 provided for "To activate the HDMI
terminal".
2
Select "Audio" ( /
3
Select the type of audio signals ( /
• If you select "Auto", an attempt will be made to identify
the type of audio signals when audio signals are
received.
Item
Auto
(factory default)
Digital
Analog
4
Press HOME MENU to exit the menu.
NOTE
• If no sound is output, specify another audio signal type.
• For the signal types to be specified, check the operation
manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analog audio cables.
then ENTER).
then ENTER).
Description
Automatically identifies input audio signals.
Accepts digital audio signals.
Accepts analog audio signals.