Pioneer pdp-506hdg Operating Instructins page 2

CAUTION
The POWER switch on this unit will not completely shut
off all power from the AC outlet. Since the power cord
serves as the main disconnect device for the unit, you
will need to unplug it from the AC outlet to shut down all
power. Therefore, make sure the unit has been installed
so that the power cord can be easily unplugged from the
AC outlet in case of an accident. To avoid fire hazard, the
power cord should also be unplugged from the AC outlet
when left unused for a long period of time (for example,
when on vacation).
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filed with liquid
near this equipment (such as a vase or flower pot) or
expose it to dripping, splashing, rain or moisture.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV
technician for help.
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the user's
right to operate the equipment.
CAUTION: This product satisfies FCC regulations
when shielded cables with Ferrite-cores attached and
connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference
with electric appliances such as radios and televisions,
use shielded cables with Ferrite-cores attached and
connectors for connections.
FEDERAL COMMUNICATIONS
D3-4-2-2-2a_A_En
COMMISSION DECLARATION OF
CONFORMITY
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
D3-4-2-1-3_A_En (2) this device must accept any interference received,
including interference that may cause undesired
operation.
Product Name: Plasma Display System
Model Number: PDP-506HDG
Product Category: Class B Personal Computers &
Peripherals
Responsible Party Name: PIONEER ELECTRONICS
SERVICE, INC.
Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA
90801-1760, U.S.A.
Phone: 310-952-2915
For Business Customer URL
http://www.PioneerUSA.com
D8-10-1-2_En
(Plasma Display)
(Media Receiver)
PDP-436HDG
(PDP-506PG) (PDP-436PG)
(PDP-R06G) (PDP-R06G)
D8-10-3b_En