Eco Max Mode - Philips SCD560 User Manual

7.2.1 Sensitivity levels and indications
Icon Sensitivity Description
highest Hear everything from your
baby. The speaker of the parent
unit is continuously on.
high Hear all sounds from soft
babbling and louder. If your
baby does not make any sound,
the speaker of the parent unit
is off.
medium Hear sounds from soft cries
and louder. If your baby makes
softer sounds, the speaker of
the parent unit does not go on.
low The speaker of the parent
unit only goes on if the baby
makes loud sounds, for instance
because it is crying.

7.3 Eco Max mode

This baby monitor has a built-in Smart Eco mode
that automatically reduces the DECT signal from
the baby unit as the distance between parent unit
and baby unit becomes shorter. By reducing radio
transmission, it helps to save energy.
If you want to save even more energy and to stop
radio transmission, activate the Eco Max mode
in the menu of the parent unit. In this mode, the
DECT signal of the baby unit is switched off. As
soon as the baby makes a sound, the DECT signal
of the baby unit automatically switches on again.
Caution:
C
In Eco Max mode, the parent unit receives
feedback from the baby unit with a delay. When
your baby makes a sound, the baby unit first has
to reactivate radio transmission before it can
send feedback to the parent unit.
7.3.1 Please note the following:
•
Before you select Eco Max mode, make sure that
the parent unit and baby unit are within operating
range, see section 'Operating range' in chapter
'Using the baby monitor'. In Eco Max mode you
do not receive feedback when the parent unit is
out of range of the baby unit. You can check the
link by pressing any button on the parent unit.
•
If there is no radio transmission from the baby
unit to the parent unit in Eco Max mode, the
sound level lights on the parent unit are off.
The sound level lights go on when the baby
unit reactivates radio transmission because
the baby makes a sound above the selected
sensitivity level.
• If you want to operate the baby monitor in
Eco Max mode, make sure that the sensitivity
level is set between 1 and 3. If the sensitivity
level is set to level 4, the baby unit does not
switch off radio transmission in Eco Max mode.
7.3.2 Activating Eco Max mode
Select 'Eco Max' in the menu with the + and -
1
buttons and press OK to confirm.
When the display shows 'Turn On', press OK
2
to switch on the Eco Max mode.
The warning message 'No alert if out of range,
3
OK?' appears on the display. Press OK to
confirm.
Note:
D
The warning message scrolls across the display
twice. If you do not press OK, the parent
unit leaves the menu and the Eco Max mode
remains off.
• The Eco Max indication flashes on the
display. The 'link' light flashes green slowly
when the baby unit does not transmit any
signals to the parent unit.
• When the parent unit receives a signal from
the baby unit because radio transmission
has been reactivated, the 'link' light turns
solid green.
15