Eco Max Mode 14 - Philips Avent SCD734 User Manual

Hide thumbs Also See for Avent SCD734:
Table of Contents


Eco Max mode
Smart Eco is a standard feature on this baby monitor It automatically
reduces the DECT signal from the baby unit to save energy To save even
more energy, activate the Eco Max mode In this mode, the DECT signal of
the baby unit is switched off as long as the baby does not make a sound.
Caution: In Eco Max mode, the parent unit receives feedback
from the baby unit with a delay. When your baby makes a
sound, the baby unit first has to reactivate radio transmission
before it can send feedback to the parent unit.
Please note the following:
In Eco Max mode you do not receive feedback when the parent unit is
out of range of the baby unit You can check the link by pressing any
button on the parent unit
The Eco Max mode cannot be activated if the microphone sensitivity is
set to the highest level
Activating Eco Max mode
1 Select ‚Eco Max' in the menu with the + and - buttons and press OK to
2 When the display shows ‚Turn On', press OK to switch on the Eco Max
3 The warning message ‚!No alert if out of range, OK?' appears on the
display. Press OK to confirm.
Note: The warning message scrolls across the display twice If you do
not press OK, the parent unit leaves the menu and the Eco Max mode
remains off.
4 The Eco Max indication flashes on the display. The ‚link' light flashes
green slowly when the baby unit does not transmit any signals to the
parent unit
5 When the parent unit receives a signal from the baby unit because
radio transmission has been reactivated, the ‚link' light turns solid
Deactivating Eco Max mode
1 Press the MENU button
2 Use the + and - buttons to select 'Eco Max' and press OK to confirm.
3 When the display shows 'Turn Off', press OK to confirm.
- 14 -


Table of Contents

Table of Contents