Sub-Zero CBBI-36R Design Manual page 10

Planning Information
Electrical Requirements.
Hz, 10 amp circuit breaker and electrical supply are
required. A separate circuit, servicing only this appliance
is required.
All built-in models are equipped with a power supply cord
with a 3-prong grounding plug which must be plugged
into a mating 3-prong grounding-type wall receptacle.
Follow local codes and ordinances when installing the
receptacle. For all built-in models, the electrical supply
should be located within the shaded area shown in the
illustration.
IMPORTANT NOTE: A ground fault circuit interrupter
(GFCI) is not recommended and may cause interruption
of operation.
Electrical Requirements
Power Supply
Circuit Breaker
Receptacle
A 220-240 V AC, 50/60
220-240 V AC, 50/60 Hz
10 amp
3-prong grounding-type
Location of electrical supply.
178
E
mm
152
mm
1918
FRONT VIEW
10
mm