Sub-Zero 695 Product Information
Side-by-side ice/water dispensing refrigerator
Hide thumbs
Also See for Sub-Zero 695:
- Planning information (16 pages) ,
- Design manual (80 pages) ,
- Use & care information manual (40 pages)
Advertisement
Quick Links
Built-In Model 695
Side-by-Side Ice/Water Dispensing
Model 695 is our largest side-by-side
refrigerator/freezer with ice and water
dispensing through the door. The built-in
design at true cabinet depth, allows easy
access to every inch of the interior. The
Sub-Zero dual refrigeration system
assures superior food preservation and
no odor transfer. Model 695 is available in
the framed, overlay and classic stainless
steel design applications.
Features
Framed, overlay and stainless steel design
applications
Stainless steel design available in classic,
platinum and carbon finishes
Through-the-door ice and water dispenser
Dual refrigeration system
Electronic digital controls
Bright interior lighting
Adjustable, spill-proof glass shelves and
adjustable door shelves
High-humidity crisper drawer with
removable divider
Door alarm
Automatic ice maker with bulk ice dispenser
Front venting allows unit to be completely
built in and serviced from the front
Meets strict Department of Energy
requirements
With the installation of a harness kit, this
appliance is certified by Star-K to meet
strict religious regulations in conjunction
with specific instructions found on
www.star-k.org.
Model 695 is not available
in Platinum or Carbon.
Classic
Classic Stainless Steel
Model Options
Design/Finish
Louvered Grille
Panel Grille – Accepts Decorative Inserts
Heavy-Duty Stainless Steel Grille
Interior Features
Refrigerator
4 Adjustable Glass Shelves
1 Stationary Glass Shelf
High Humidity Compartment with Divider
2 Storage Drawers
Adjustable Roll-Out Deli Basket
3 Adjustable Door Shelves
Adjustable Dairy Compartment
Egg Container
Freezer
Automatic Ice Maker
2 Adjustable Wire Shelves
1 Stationary Solid Shelf
3 Storage Drawers
5 Adjustable Door Shelves
2 Juice Can Shelves
695/F
695/O
Framed
Overlay
Accessories
Louvered, panel and stainless steel
(classic, platinum and carbon) grilles in 1"
height increments from 10" to 15"
Front and grille panels for framed design
(white and classic stainless steel)
Side panels in white and classic
stainless steel
Extended full-length framed handles
Stainless steel (classic, platinum and
carbon) tubular handles for overlay design
Polished chrome handles for overlay design
Gallon door shelf
Dozen egg container with lid
90˚ and 105˚ door stop kits
Accessories are available through your Sub-Zero
dealer. To obtain local dealer information, visit the
Locator section of our website, subzero.com.
Framed
Overlay
695/S
Classic
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sub-Zero Sub-Zero 695
Summary of Contents for Sub-Zero Sub-Zero 695
- Page 1 Built-In Model 695 Side-by-Side Ice/Water Dispensing Model 695 is our largest side-by-side refrigerator/freezer with ice and water dispensing through the door. The built-in design at true cabinet depth, allows easy access to every inch of the interior. The Sub-Zero dual refrigeration system assures superior food preservation and no odor transfer.
- Page 2 Side-by-Side Ice/Water Dispensing Specifications Overall Width 48" Overall Height (with standard 11" grille) 84" Overall Depth 24" Door Swing Clearance Refrigerator Capacity 18.2 cu ft Freezer Capacity 9.8 cu ft Opening Width Opening Height " * Minimum Height Required 83"...
Need help?
Do you have a question about the Sub-Zero 695 and is the answer not in the manual?
Questions and answers
Our 695 freezer is not working.
Troubleshooting steps for a Sub-Zero 695 freezer that is not working include:
1. Check if the power cord is plugged into a properly grounded 3-prong outlet installed according to electrical codes.
2. Ensure the water supply is connected if using the automatic ice maker.
3. Inspect for water leaks.
4. Confirm the drain pan is in the correct position.
5. Verify that the kickplate is installed properly.
6. Make sure panels are securely attached and properly aligned.
7. Check if the doors are aligned for proper appearance and operation.
8. Confirm all accessories have been installed.
9. Inspect stainless steel doors for imperfections.
10. Ensure the floor beneath the unit is level with the surrounding floor.
11. Make sure the door can open at least 90° for proper operation.
These steps help ensure proper installation and function of the freezer.
This answer is automatically generated
I need to replace the power cord. Where can I purchase this?